Linux Security userguide

OVERVIEW
This document is a general checklist for hardening a Linux system. The important thing to remember is that there is no 100% right checklist. There are bound to be variables that must be changed, and all this document is intending on doing, is to allow the Linux user to follow the steps and successfully secure any type of system without needing much knowledge. However, they will still have the ability to further their security with the more advanced checklists. Of course with any of these checklists, there is a chance of breaking something, and thus all steps must be researched for your specific distro/system. A single user's security settings will be vastly different from a multi-user system.

Notes:
1. All commands listed will need to be run as root. You can switch to root by running either sudo I or su.
2. Where we use ?vi as the command line editor, you can replace it for ?gedit or any other text editor.
3. Where use ?apt-get you can insert your distro version of package management. Or if necessary you can download the binaries and compile them (a somewhat easy process of ./configure, make, make install, etc).
4. Shaded areas are terminal commands, you can cut and paste these, although one should be careful and know what the command actually does.




MAINTAINANCE

Update the Operating System

Debian, Ubuntu, Kali, etc
apt-get update
apt-get upgrade

Redhat, YellowDog, CentOS, Scientific Linux, Fedora, etc.
yum list updates
yum update

Suse/etc
zypper ref (Refresh the repos)
zypper dup (Normal update and install)




HARDEN THE SYSTEM

Install Bastille
There are a few options around to harden a linux system, but we have tested Bastille in real life scenarios and found it to be the most resilient. It is rather customizable for various types of configurations.

apt-get install bastille

Choose yes when it asks if you want to continue. Once it is done installing, run:

bastille -c

This will start the command line interface, to allow you to configure Bastille. From there, you'll accept their terms of agreement, and be on your way. It is safe to say that you can just accept the default values, however you should also read about them. Please see our Bastille Configuration file for a more detailed look at Bastille. It's safe to ignore most errors it throws at the end and beginning of the configuration.

Install Apparmor
Some packages will install their own enforced profiles. Active profiles for LAM Server:
usr.sbin.mysqld
usr.sbin.apache2
All activity will be logged by auditd and saved to /var/log/audit/audit.log.
apt-get install apparmor-profiles
apparmor_status (to see current profiles and associated modes)
man apparmor (for more details of what to do with that information)


Configure and Use SELinux
As this is the more complicated and advanced alternative to Apparmor, there is a detailed checklist that can be found here: https://docs.oracle.com/cd/E37670_01/E36...x_sec.html and a troublshooting guide can be found here https://wiki.centos.org/HowTos/SELinux. In this release of our checklist, we have excluded our previous steps and notes on SELinux as we believe making changing to SELinux requires greater detail and knowledge [gained by fully referencing the above documents], in an effort to prevent people from ?cutting and pasting or falling into ?script kiddie mode.

Configure and use PAM authentication daemon
The instructions below are assuming that you do not have SELinux installed. These configurations may change with the installation of SELinux. They will be covered in the SELinux documents listed above. Also for further PAM info, refer to the PAM Configurations here: http://doc.mapr.com/display/MapR/PAM+Configuration.

vi /etc/pam.d/common-password
change:
password requisite pam_unix.so nullok obscure sha512
to:
password requisite pam_unix.so nullok obscure sha512 min=8
Change min=8 with whatever password length you desire to be enforced.

Shadow File Password Policy
Change minimum and maximum password ages (most likely set to 0:99999 in the file). We suggest changing those to 1:60 for all entries. . Here is a good example of changing password aging from the the shadow file http://www.cyberciti.biz/faq/understandi...adow-file/

Shutdown unnecessary services
netstat -anp | grep LISTEN | grep -v STREAM

Analyze the services and the process id/process name. Determine which services to terminate. Take caution and ensure you research any unknown services (some can break your host).
cd /etc
find . -print | grep XXX (where XXX is part of the name of the program)

For those entries in the "/etc/rc#.d" directory, delete them (rm). Some suggestions to disable:
a. Remove or disable the "r" commands. This includes rlogind, rshd, rcmd, rexecd, rbootd, rquotad, rstatd, rusersd, rwalld and rexd. These services are inadequately authenticated. It is better to remove these and use SSH and scp instead.

b. Remove or disable fingerd. Remove or disable fingerd if present. Apart from the possibility of a software vulnerability, fingerd allows an attacker to enumerate usernames on the system and to determine the timing and frequency of system administrator logins.

c. Remove or disable tftpd. Tftpd is unauthenticated and not protected against brute-force attacks seeking to enumerate and download files. Do not use tftpd (trivial file transfer protocol) unless unavoidable.

d. Remove or disable telnet. Telnet sends commands unencrypted over the wire. This enables the sniffing of passwords and other information as well as man-in-the-middle attacks. Replace with SSH.

e. Disable SNMP daemon. If present by default, disable any SNMP daemon unless this is really required for the role of the computer. Research this service for further info.

Examine INIT files for discrepancies
cd /etc/init or /etc/xinit (should match /etc/init.d)
cd /etc/init.d (examine the two to make sure they match)
cd /etc
find rc*.d | xargs ls -l
All entries should be links to the ../init.d directory. Investigate those that aren't.

Examine startup scripts (00755 is the norm, but 00700 is ok here as well)
rc.* (as rc.1-6 or rc1-6.d):
chmod 0700 /etc/rc*
chmod 0700 /etc/init.d*

Here's a good article about services and runlevels: https://www.linux.com/news/enterprise/sy...duction-to services-runlevels-and-rcd-scripts/

LOCK DOWN THE USER SESSION
Secure terminals
The relevant configuration file may be called /etc/ttys, /etc/default/login, /etc/security or /etc/securetty depending on the system. See the manual pages for file format and usage information. Check that the secure option is removed from any local entries that don't need root login capabilities. The secure option should be removed from console if you do not want users to be able to reboot in single user mode. [Note: This does not affect usability of the su command.] If it is not already the default, consider using a special group (such as the wheelgroup on BSD systems) to restrict which users can use su to become root.

PATH advice
Check that the current directory "." is not in the PATH. Note that an empty string is interpreted to mean the same as "." so also make sure the PATH does not contain any empty strings. For example, the following PATH is insecure:
/sbin:/bin:/usr/sbin::/usr/bin
This PATH advice is especially important for the root account. Including ?. in the PATH variable can be used by an attacker to fool a root user into running a malicious binary by substituting ./ls instead of /bin/ls for example.

Configure user login sessions to time out automatically.
After a certain period of inactivity, in particular for the root user. To do this, set the appropriate variable in your shell's startup files.
typeset -r TMOUT=900 (15 minutes = 900 seconds)

Securing History
chattr +a .bash_history (append)
chattr +I .bash_history

Users history is being locked and they will have to agree before they use your services.

LOCK DOWN config-FILES CONTENT
Analyze DNS
Looking for rogue entries in the resolv.conf file.
vi /etc/resolv.conf

Here you should just see the DNS server that the router/modem passed on to your computer, and whatever you have added. Other entries can be considered to be rouge (remember to scroll down). However, before you go and delete your whole file, be sure and lookup the listed server and do your research. Here is a good link for some basic DNS finding info:
http://www.cyberciti.biz/faq/how-to-find...or-router/

Analyze host files
Ensure there is nothing redirecting incorrectly here.
vi /etc/hosts

Analyze contents of permission files
If you are running , root should have * as the password. If you are running su, it will have a password. Nobody else aside from you and known users should have a password (the big long hash). If they do, make sure they shouldn't be there, and delete that line. Make sure system users have /bin/null set as their shell. Check for rogue users.
vi /etc/passwd
vi /etc/shadow

SET PERMISSIONS ON SENSITVE SYSTEM FILES
Sensitive system files need to have the proper permissions set on them to prevent unauthorized changes (see ?Integrity in the CIA triad).
Configuration Files
a. Firewall
chmod 0700 /etc/profile
chmod 0700 /etc/hosts.allow
chmod 0700 /etc/mtab,
chmod 0700 /etc/utmp
chmod 0700 /var/adm/wtmp (or /var/log/wtmp),
chmod 0700 /etc/syslog.pid (or /var/run/syslog.pid)

b. Kernel
chmod 0700 /etc/sysctl.conf
chmod 0700 /etc/inittab

c. Users
Make sure the owner & group are set to root.root and the permissions are set to 0644 (except on the /etc/shadow file which should be 400). Here is a good link for permission changing in Linux:
http://articles.slicehost.com/2010/7/17/checking-linux- file-permissions-with-ls

ls -la /etc/fstab
Verify: root.root and -rw-r--r-- (644)

ls -la /etc/passwd
Verify: root.root and -rw-r--r-- (644)

ls -la /etc/shadow
Verify: root.root and -rw-r----- (400)

ls -la /etc/group
Verify: root.root and -rw-rr-- (644)
ls -la /etc/sudoers
Verify: root.root and -rw-rr-- (644)

Log Files
Ensure that these files (usually located in /var/log/, /var/adm, or var/tmp) are only writable by root.

Any World-Writable Files
Ensure that there are no unexpected world writable files or directories on your system. Use the find command to locate these:
find / -type d -perm +2 ls
chmod 750
rm

SET PERMISSIONS ON SENSITIVE BINARIES
Another good security practice is to set the permissions on certain commands. However, it is very important to remember that what you change here depends on what system youre using. Also, the location of binaries will differ based upon the system (for instance /bin and /usr/bin and /usr/sbin). For instance a server used for development would need the ?make command to be able to be run by any user. Whereas, on a production server it would not be needed. Some examples (you'll need to run these as root):

Set uid:
i / su
find / \( -perm -2000 \)
chown root:admin /bin/example
chmod 02750 /bin/example
find / \( -perm -4000 \)
chown root:admin /bin/example
chmod 04750 /bin/su

FURTHER SUGGESTIONS
Privilege Escalation
chmod 02750 /bin/su
chmod 02750 /bin/sudo
Network settings:
chmod 02750 /bin/ping
chmod 02750 /sbin/ifconfig
Users On:
chmod 02750 /usr/bin/w
chmod 02750 /usr/bin/who
System Configuration
chmod 02750 /usr/bin/locate
chmod 02750 /usr/bin/whereis

Kernel Modules
Ensure that the files holding the kernel and any kernel modules are owned by root, have group ownership set to group id 0 and permissions that prevent them being written to by any non-root users.
To list current module directory:
echo "Modules dir: /lib/modules/$(uname -r) for kernel version $(uname -r)"

To list contents/permissions of that directory:
ls -l /lib/modules/$(uname -r)



If you would like further information or assistance please contact us and we are always interested in job opportunities.

ooooooh thaaaaaaaaanks man its great work my bro to share how can protect my service from attack

This is a good piece of article. Linux is definitely more secure than windows

Looks helpful, good for me to refresh my knowledge

A very detailed and knowledge refreshing post. I believe will be the best even for the noobs