Garry's Mod Leaks
[LEAK] Leys Serverside AntiCheat (LSAC) - the best serverside Anti-Cheat!
Submitted by Ananalka, 04-05-2022, 06:02 PM, Thread ID: 241849
Thread Closed
RE: [LEAK] Leys Serverside AntiCheat (LSAC) - the best serverside Anti-Cheat!
Installation
Ez Guide
The installation process is amazingly easy. Drag and drop the addon to your servers garrysmod folder. It should add the files into the already existing directories addons/ and lua/. Reboot your server and it's installed! You can now open the menu by typing !ac in chat. If it doesn't you either A. Are not an admin on your servers admin mod or B. copied the wrong directory or into the wrong directory.
After Installation you may configure the addon to your liking. However, I recommend leaving as much as possible to default settings because if you don't know what you are doing this may cause more harm than good.
To open the menu you need admin rights in your admin mod.
If you are not sure whether you have installed it right, check the server ( NOT CLIENT ) console. The Anti-Cheat will always print there that it loaded.
Changing Anti-Cheat Settings
Within the menu there is a settings tab with all of the settings of the Anti-Cheat.
You can view all of them as they currently are and change them to your liking. For example, lets say we want to change the message being shown to cheaters. We simply go to the settings and click on punishments. Then we get a nice overview of all current punishment settings.
Then we can proceed to click on "Message to show cheaters" and we get a popup enabling us to enter a new message for cheaters to see when they are getting punished.
Changing or disabling individual detections and cheat preventions
The detections and cheat prevention are all within the modules tab. You can press the ON/OFF button to disable individual detections. Clicking on the wrench to the right will allow you to perform several sub actions. The most useful of these is "Reset Module" in case you changed something and thus the module doesn't work as intended now.
I recommend leaving as much as possible on default! Do not change stuff if you do not know what you are doing!!
Some (only few) off the modules have internal module settings. You can open these by clicking on the module of your liking or pressing "Module Options".
To reset a setting a internal which you changed simply do a right mouse click instead of a left one, and it will go back to its default value without affecting the other internal settings of said module.
Ez Guide
The installation process is amazingly easy. Drag and drop the addon to your servers garrysmod folder. It should add the files into the already existing directories addons/ and lua/. Reboot your server and it's installed! You can now open the menu by typing !ac in chat. If it doesn't you either A. Are not an admin on your servers admin mod or B. copied the wrong directory or into the wrong directory.
After Installation you may configure the addon to your liking. However, I recommend leaving as much as possible to default settings because if you don't know what you are doing this may cause more harm than good.
To open the menu you need admin rights in your admin mod.
If you are not sure whether you have installed it right, check the server ( NOT CLIENT ) console. The Anti-Cheat will always print there that it loaded.
Changing Anti-Cheat Settings
Within the menu there is a settings tab with all of the settings of the Anti-Cheat.
You can view all of them as they currently are and change them to your liking. For example, lets say we want to change the message being shown to cheaters. We simply go to the settings and click on punishments. Then we get a nice overview of all current punishment settings.
Then we can proceed to click on "Message to show cheaters" and we get a popup enabling us to enter a new message for cheaters to see when they are getting punished.
Changing or disabling individual detections and cheat preventions
The detections and cheat prevention are all within the modules tab. You can press the ON/OFF button to disable individual detections. Clicking on the wrench to the right will allow you to perform several sub actions. The most useful of these is "Reset Module" in case you changed something and thus the module doesn't work as intended now.
I recommend leaving as much as possible on default! Do not change stuff if you do not know what you are doing!!
Some (only few) off the modules have internal module settings. You can open these by clicking on the module of your liking or pressing "Module Options".
To reset a setting a internal which you changed simply do a right mouse click instead of a left one, and it will go back to its default value without affecting the other internal settings of said module.
Check gmod store for more info, there are a lot of info how to install the addon, this addon gave me my friend from gmodstore and i leak it, so if it's not work - this is addon developer problem and not my fault04-05-2022, 08:24 PMFlaksy Wrote: [lsac] Couldn't include file 'includes\modules\gmbc.lua' - File not found (<nowhere>)
1. pcall - [C]:-1
2. unknown - addons/lsac/lua/autorun/server/sv_lsac.lua:19
[/LSAC/] !!!ERROR!!!
[lsac] addons/lsac/lua/autorun/server/sv_lsac.lua:19: [LSAC ERR INFO]
Module not found!
[LSAC ERR INFO/]
1. error - [C]:-1
2. errorh - addons/lsac/lua/autorun/server/sv_lsac.lua:19
3. unknown - addons/lsac/lua/autorun/server/sv_lsac.lua:19
I think i'm stupid some
Well, idk what i done yet, but it does'nt show errors. Well...
oh f*ck...
[lsac] addons/lsac/lua/autorun/server/sv_lsac.lua:19: [LSAC ERR INFO]
LSAC.datastorage:SyncKeyValues is not implemented yet
[LSAC ERR INFO/]
1. error - [C]:-1
2. unknown - addons/lsac/lua/autorun/server/sv_lsac.lua:19
3. unknown - [string "loaded bytecode"]:0
4. unknown - [string "loaded bytecode"]:0
5. unknown - [string "loaded bytecode"]:0
OH F*CK
ERROR
The condition of chat command "jailpos" threw an error:
gamemodes/darkrp/gamemode/libraries/fn.lua:252: attempt to index local 'xs' (a nil value)
If this is the command of a custom job, you probably did something wrong when making it.
It cause some problems
[sam147] addons/sam147/lua/sam/modules/utime.lua:26: attempt to perform arithmetic on a nil value
1. GetUTimeTotalTime - addons/sam147/lua/sam/modules/utime.lua:26
2. callback - addons/cats/lua/cats/server.lua:261
3. query - gamemodes/darkrp/gamemode/libraries/mysqlite/mysqlite.lua:319
4. Query - addons/cats/lua/cats/server.lua:49
5. v - addons/cats/lua/cats/server.lua:257
6. unknown - lua/includes/modules/hook.lua:96
[ERROR] gamemodes/darkrp/gamemode/modules/base/sv_gamemode_functions.lua:735: attempt to index local 'jobTable' (a nil value)
1. unknown - gamemodes/darkrp/gamemode/modules/base/sv_gamemode_functions.lua:735
Without LSAC all works perfectly
All errors appears after joining the server
1. error - [C]:-1
2. unknown - addons/lsac/lua/autorun/server/sv_lsac.lua:19
3. unknown - [string "loaded bytecode"]:0
4. unknown - [string "loaded bytecode"]:0
5. unknown - [string "loaded bytecode"]:0
Timer Failed! [LSAC.LSAC.datastorage.DataStorageThink][<nowhere>]
[lsac] addons/lsac/lua/autorun/server/sv_lsac.lua:19: [LSAC ERR INFO]
LSAC.logs not loaded!!!!
[/LSAC ERR INFO]
1. error - [C]:-1
2. unknown - addons/lsac/lua/autorun/server/sv_lsac.lua:19
After deleting SAM, error doesn't dissappeared
Users browsing this thread: 18 Guest(s)