Selling
Linken Sphere - multithreaded browser / antidetect / traffic arbitrage / multiaccount
Submitted by Gor510, 07-10-2018, 02:30 PM, Thread ID: 103056
Thread Closed
RE: Linken Sphere - multithreaded browser / antidetect / traffic arbitrage / multiaccount
Greetings, friends!
We bring to your attention the world's first public fake detector of the new generation, incorporating all the best and most advanced technologies for checking the quality of the substitution of the person on the Web.
We are sure that now you will forget about the need to use a lot of different checkers, services and sites to check the necessary parameters of substitutions and will be able to get the best quality and useful information in only one place.
![[Image: FV.jpg]](https://image.ibb.co/muFaMU/FV.jpg)
What is the difference from existing solutions?
All the usual checkers for checking anonymity (such as whoer.net / browseleaks.com / whatleaks.com, etc.) are able to see only primitive mismatches in the headers and browser settings. The visibility of a qualitative browser setting when checking on these resources is sufficient for normal anonymization, but it is not an indicator of a quality substitution for Antifraud systems using many of their own algorithms.
In addition, many known anonymity checkers have direct relevance directly to companies that develop AF systems, which makes it possible to compromise the addresses and configurations from which such resources were visited.
If your work is related to the need to substitute browser settings and fingerprints, then it is the likelihood that Antifraud will notice the site or service these changes and is fundamental to success.
Fake Vision - the world's first public fake detector, built using the technologies of the most common Antifraud systems.
Thanks to the use of a lot of advanced technologies and tests used in the modern AF systems studied by us, the detector will informively show the probability of fake of your browser or IP and will indicate the weaknesses. This will help to fix the problem as quickly as possible and significantly improve the results of your work.
![[Image: f2.jpg]](https://image.ibb.co/etLQMU/f2.jpg)
Using Fake Vision, you no longer have to visit many resources to perform separate checks - the fake detector combined a huge amount of verifiable information related to both browser settings and connection parameters.
How it works?
By accessing Fake Vision, you can independently select the necessary checks associated with the connection based on the need (some tests require additional time - an approximate expectation is written next to a specific test). For the most accurate picture of the fake, we recommend performing the maximum possible list of checks.
After launching the test, Fake Vision performs browser validation and connection tests using specific algorithms and technologies aimed at detecting spoofing.
In addition to special tests, the following basic parameters are checked:
General: ip4 / WebRTC addresses, Timezone, Zip, Geolocation, Useragent
Browser: Scripts, Audio, Screen, Canvas, Navigator, Plugins, Fonts, WebGl, Timezone, clientRects, Modernizr, Java, Ubercookie, Hashes
Connection: Open ports, Nmap, DNS, Double ping, Black List, Proxy headers, Timezone, etc.
![[Image: F3.jpg]](https://image.ibb.co/f2Zfo9/F3.jpg)
Based on the results of the tests conducted, you will get visual information in the form of percentages of the likelihood that the browser or connection to the Network has been subjected to interferences from the user. In addition, the fake detector will point to the main problem points in red so that you can eliminate the shortcomings in your configuration as quickly and comfortably as possible.
Fake Vision is free for use by a public project, which from now on also becomes a default fake detector in the browsers The Sphere and Linken Sphere. Our team strongly recommends its use for daily work in order to increase the comfort and quality of your work.
At the moment the project has the status of "Beta", and there may be minor problems that will be promptly corrected and updated. We are grateful to all users for help in improving the project.
Official address of the detector: http://f.vision
If you have questions or wishes, you can use the following contacts for communication:
Telegram: @Gor510, @fakevisioneng (Telegram-group)
Jabber: [email protected]
E-mail: [email protected]
We bring to your attention the world's first public fake detector of the new generation, incorporating all the best and most advanced technologies for checking the quality of the substitution of the person on the Web.
We are sure that now you will forget about the need to use a lot of different checkers, services and sites to check the necessary parameters of substitutions and will be able to get the best quality and useful information in only one place.
What is the difference from existing solutions?
All the usual checkers for checking anonymity (such as whoer.net / browseleaks.com / whatleaks.com, etc.) are able to see only primitive mismatches in the headers and browser settings. The visibility of a qualitative browser setting when checking on these resources is sufficient for normal anonymization, but it is not an indicator of a quality substitution for Antifraud systems using many of their own algorithms.
In addition, many known anonymity checkers have direct relevance directly to companies that develop AF systems, which makes it possible to compromise the addresses and configurations from which such resources were visited.
If your work is related to the need to substitute browser settings and fingerprints, then it is the likelihood that Antifraud will notice the site or service these changes and is fundamental to success.
Fake Vision - the world's first public fake detector, built using the technologies of the most common Antifraud systems.
Thanks to the use of a lot of advanced technologies and tests used in the modern AF systems studied by us, the detector will informively show the probability of fake of your browser or IP and will indicate the weaknesses. This will help to fix the problem as quickly as possible and significantly improve the results of your work.
Using Fake Vision, you no longer have to visit many resources to perform separate checks - the fake detector combined a huge amount of verifiable information related to both browser settings and connection parameters.
How it works?
By accessing Fake Vision, you can independently select the necessary checks associated with the connection based on the need (some tests require additional time - an approximate expectation is written next to a specific test). For the most accurate picture of the fake, we recommend performing the maximum possible list of checks.
After launching the test, Fake Vision performs browser validation and connection tests using specific algorithms and technologies aimed at detecting spoofing.
In addition to special tests, the following basic parameters are checked:
General: ip4 / WebRTC addresses, Timezone, Zip, Geolocation, Useragent
Browser: Scripts, Audio, Screen, Canvas, Navigator, Plugins, Fonts, WebGl, Timezone, clientRects, Modernizr, Java, Ubercookie, Hashes
Connection: Open ports, Nmap, DNS, Double ping, Black List, Proxy headers, Timezone, etc.
Based on the results of the tests conducted, you will get visual information in the form of percentages of the likelihood that the browser or connection to the Network has been subjected to interferences from the user. In addition, the fake detector will point to the main problem points in red so that you can eliminate the shortcomings in your configuration as quickly and comfortably as possible.
Fake Vision is free for use by a public project, which from now on also becomes a default fake detector in the browsers The Sphere and Linken Sphere. Our team strongly recommends its use for daily work in order to increase the comfort and quality of your work.
At the moment the project has the status of "Beta", and there may be minor problems that will be promptly corrected and updated. We are grateful to all users for help in improving the project.
Official address of the detector: http://f.vision
If you have questions or wishes, you can use the following contacts for communication:
Telegram: @Gor510, @fakevisioneng (Telegram-group)
Jabber: [email protected]
E-mail: [email protected]
Users browsing this thread: 22 Guest(s)